# One-time campaigns (/sending-mail/one-time-campaigns)
## Overview [#overview]
A one-time campaign mails once, then you see the results. You pick who to mail, the template, the postage and the send date. Then you pay at checkout, and LettrLabs prints and mails the cards.
You can use one-time campaigns to:
* Mail a list that you upload, or one person that you add by hand.
* Mail people that you pick in your Address Book.
* Mail every home in your service areas, or in an area that you draw.
* Keep people out of a campaign, such as people that you mailed recently.
[Send your first campaign](/getting-started/send-your-first-campaign) walks you through the full first send, step by step.
## How campaigns work: send types and sources [#how-campaigns-work-send-types-and-sources]
Each campaign starts in **Send Mail**. The first step, **Objective**, asks for the send type and the source.
The send type sets how often the campaign mails:
| Send type | What it does |
| ---------------------- | ----------------------------------------------------------------- |
| **One-Time Campaign** | Mails once, then you see the results. You pay at checkout. |
| **Automated Campaign** | Keeps mailing each home as it qualifies, inside a monthly budget. |
The source is where the people come from. A one-time campaign takes one of three sources:
You upload a CSV or Excel file, or you add people by hand. LettrLabs checks each row before it mails. Pick **My Data and Integrations**, then **My List or Address Book**.
You pick people that you saved in your Address Book. The campaign mails each one, with no file. Pick **My Data and Integrations**, then **My List or Address Book**.
LettrLabs finds the homes and their addresses for you. You set the area and filters on the homes. Pick **Map-Based Search**, then **Targeted Prospecting**.
A one-time campaign can also mail the homes around addresses that you upload. [Area and radius mail](/sending-mail/automated-campaigns/area-and-radius-mail) gives the steps.
After **Objective**, each campaign goes through the same steps: **Audience**, **Creative**, **Measurement** and **Budget**. Then you review it and go to checkout.
***
## Quick send to your own list [#quick-send-to-your-own-list]
Do this when you have a list of people in a file, and you want to mail them once.
In the left navigation, open the menu beside **Send Mail**, and click **Quick send**. Quick send opens at the **Design** step.
Under **Pick your first touch**, pick a template for your card. Then click **Next**. The **Recipients** step opens.
Under **Upload a file**, click **Click to upload**. Or drop the file into the drop zone.
Select a CSV or Excel file (.csv, .xlsx or .xls), with one home on each row.
In the **Map your columns** dialog, check the field that each column fills. Then click **Use this mapping**.
Optional: To add a person by hand, click **Add one**. After an upload, open **Add recipients** and click **Add one person**.
Fix each row that the list check marks as bad, or remove it.
Click **Next**. When the dialog "Some rows will not be mailed" opens, click **I understand, continue**.
On the **Checkout** step, set **Mailing and timing**, the holdout and the budget. Then read the **Review**, and click **Go to checkout**.
Quick send has three steps: **Design**, **Recipients** and **Checkout**. It always makes a one-time campaign to your list, so it does not show the **Objective** step.
On the **Templates** page, **Quick Order** on a template card also opens Quick send. The **Design** step then holds that template.
A file needs a name, the street address, the apartment or unit, the city, the state and the ZIP. A header row helps. To see the format, click **Download the sample file**.
Duplicate rows merge into one card for each home. Homes on your exclusion lists are taken out.
You're done when the message "is launched" shows with the campaign name. Checkout charges the order. The campaign mails on the send date.
## Mail people in your Address Book [#mail-people-in-your-address-book]
Do this when the people that you want to mail are already in your Address Book.
In the left navigation, click **Address Book**.
Select the people that you want to mail.
Click **Send Mail**. The dialog "Send mail to these contacts?" opens.
Click **Open Send Mail**. Send Mail opens with the people that you picked.
Finish the steps of Send Mail, then click **Go to checkout**.
You can pick up to 10,000 contacts one by one. To mail more, select all that match a search.
You can also start in Send Mail. Pick **My Data and Integrations**, then **My List or Address Book**. On the **Audience** step, click **Use address book**.
You're done when the message "is launched" shows with the campaign name. Checkout charges the order. The campaign mails on the send date.
## Mail every home in an area [#mail-every-home-in-an-area]
Do this to reach new people near your business, such as every homeowner in two ZIP codes. You do not need a list.
In the left navigation, click **Send Mail**.
Under **Campaign Type**, click **One-Time Campaign**.
Under **How Do You Want to Build This?**, click **Build a Custom Campaign**.
Under **What Builds the Audience?**, click **Map-Based Search**.
Under **Where on the Map?**, click **Targeted Prospecting**.
Click **Next**. The **Audience** step opens.
On the **Filters** page, set who gets the card and the property type.
On the **Location** page, under **Where it mails**, select where to mail.
Click **Next** to go on to the **Creative** step.
Under **Pick your first touch**, click your template, then click **Use this design**.
Click **Next** until the **Budget** step opens.
Set **Send date** and **How many**. **How many** sets the number of homes to mail.
Read the **Review**, then click **Go to checkout**.
In the **Name your campaign** dialog, keep or change the **Name**. Then click **Go to checkout**.
The **Filters** page limits which homes in the area get mail:
| Filter | Choices |
| ---------------------- | ---------------------------------------------------------------------------------------------------------------- |
| **Who gets this card** | **Homeowners**. **Homeowners and renters** and **Renters** show **Coming soon**, and you cannot select them yet. |
| **Property type** | **Single family**, **Multi family** or **All property types** |
| **Advanced filters** | Optional filters on the home and its owner. |
With **Homeowners**, **If the owner lives somewhere else** sets what LettrLabs does with a home that its owner does not live in. Leave **Advanced filters** empty to mail every home. Each filter makes the list shorter.
**Where it mails** has three choices:
| Choice | What it mails |
| -------------------- | ---------------------------------------------------------------------- |
| **All of the U.S.** | Every home that the filters find, in the 48 contiguous states. |
| **My service areas** | The homes in the service areas that you pick from your list. |
| **A custom area** | The homes in an area that you draw on the map, for this campaign only. |
For **A custom area**, search for a place, drop a radius pin, or draw a shape. A custom area is not saved as a service area. The page shows the number of homes that the area and the filters find. To see the map without the preview, click **Hide preview**.
You're done when the message "is launched" shows with the campaign name. Checkout charges the order. The campaign mails on the send date, and it shows on the **One-time** tab of **Campaigns**.
To mail the new homes of an area each month, use [Area and radius mail](/sending-mail/automated-campaigns/area-and-radius-mail).
## Keep people out of a campaign [#keep-people-out-of-a-campaign]
Do this when some people must not get this card, such as people that you mailed last week.
In Send Mail, go to the **Audience** step.
Open the **Exclude** page. Its title is **Who shouldn't get this card**.
Turn on each card that you want, and set its window in days.
Optional: Click **Add a suppression audience**, and pick a suppression list.
Click **Next**.
The **Exclude** page offers these cards. The cards that show depend on the source.
| Card | What it keeps out |
| ---------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| **Do not mail** | Everyone who asked LettrLabs to stop. It cannot be turned off. |
| **Mailed recently: this campaign** | Anyone this campaign mailed inside the window. |
| **Mailed recently: all campaigns** | Anyone any of your campaigns mailed inside the window. |
| **Past customers** | Anyone who bought from you inside the window. |
| A suppression list | The homes on that list. |
| A global suppression list | The homes on that list. The card shows the tag **Global** and the hint "Applies to every campaign of this account". It is locked, and you cannot turn it off. |
You're done when the **Review** reads back your exclude choices. Homes that you keep out are not mailed, and you do not pay for them.
## Change or cancel an order [#change-or-cancel-an-order]
What you can change depends on the stage of the order.
| Stage of the order | What you can do |
| -------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------- |
| **Draft** | Edit or delete the draft. It charges nothing until you launch it. |
| **Edits Needed** | Edit the order, then go through checkout again. See [Fix an order sent back for edits](/sending-mail/campaigns#fix-an-order-sent-back-for-edits). |
| Launched, waiting for its send date, and not charged yet | Cancel it. Nothing is charged. |
| Paid | Contact support. You cannot change or cancel a paid order in the app. |
To cancel a launched one-time campaign that is not charged yet:
Open the campaign page. Click **Actions**, then click **Cancel**.
In the dialog, click **Cancel the one-time campaign**.
You're done when the message "One-time campaign canceled" shows. The design and the results of the campaign stay. See [Save a draft, or cancel before it mails](/sending-mail/postage-and-checkout#save-a-draft-or-cancel-before-it-mails).
## FAQ [#faq]
A required choice is empty, such as the area, or a row of your list is bad. Read the hint beside **Next**. It names the missing choice or the number of rows to fix.
The account has no service area. Select **A custom area** and draw the area. Or make a service area with [Service Areas](/audiences/service-areas), then start again.
A very large area can show no count. Draw a smaller area, or add filters to make the list shorter.
Your list holds duplicate rows, or homes on an exclusion list. Duplicates merge into one card for each home. Read the counts, then click **I understand, continue**.
The row has no street, no house number, or no unit in a multi-unit building. Add the missing part to the row. A row with no unit needs the apartment or unit number.
The row has no city or state, or a value LettrLabs cannot read. Use the two-letter state, such as TX. Use a 5-digit ZIP, such as 75034.
The row holds the full address in one column, and LettrLabs could not find it. Write it with commas, as in `4410 Preston Rd, Frisco, TX 75034`. Or give the row its address parts.
The file holds a character that LettrLabs cannot read. Check the file encoding, then upload the file again.
The row holds a part of a return address or a return name. Give the return address 1, the return city, the return state and the return ZIP, or none of them. Give the return first name and the return last name together, or neither.
The merge values of the row hold too many characters. Shorten them.
You picked more than 10,000 contacts one by one. Search for the people that you want, then select all that match the search.
## Related [#related]