# Automated campaigns (/sending-mail/automated-campaigns)
## Overview [#overview]
An automated campaign keeps mailing each home as it qualifies. A rule or a source starts each mailing. The campaign mails inside the budget that you set, until you pause it.
You can use automated campaigns to:
* Mail homes after a storm, a power outage or a property signal.
* Mail the new homes of an area each month.
* Mail your CRM customers, your store customers or your website visitors.
* Send follow-up cards to each home, on a schedule that you set.
## How automated campaigns work [#how-automated-campaigns-work]
Each automated campaign starts in **Send Mail**. Under **Campaign Type**, click **Automated Campaign**. Then click **Start from a Playbook** to start from a ready-made campaign, or **Build a Custom Campaign**.
Under **What Builds the Audience?**, you pick where the homes come from:
| Choice | What it mails | Page |
| ---------------------------- | ----------------------------------------------------------------------------------------------------------- | --------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| **Buying Signals** | Homes after weather or an outage, homes with work that is due, new movers and homes near competitor permits | [Weather and outages](/sending-mail/automated-campaigns/weather-and-outages), [Property signals and movers](/sending-mail/automated-campaigns/property-signals) |
| **My Data and Integrations** | Your CRM or store customers, your website visitors, and what your systems send | [CRM and store customers](/sending-mail/automated-campaigns/crm-and-store-customers) |
| **Map-Based Search** | The homes of an area, or the homes around your jobs | [Area and radius mail](/sending-mail/automated-campaigns/area-and-radius-mail) |
The steps after **Objective** are the same for each campaign: **Audience**, **Creative**, **Measurement** and **Budget**. The **Budget** step ends with the **Review**.
These words describe how an automation mails:
| Word | What it means |
| ----------- | ----------------------------------------------------------------------------------------------------- |
| Run | One mailing of the automation. A run finds the homes, pays, and then mails. |
| Touch | One card of the sequence that each home gets. Touch 1 mails first. |
| Approval | **Approve each run** holds each run until you approve it. **Auto-approve** mails it when it is ready. |
| Held touch | A touch that waits for you, for example after a failed payment. |
| Event limit | The most homes that one weather event or outage mails. |
You can see each run on the **Batches** tab of the campaign page. [Campaigns](/sending-mail/campaigns) gives each campaign status and each run status.
## Add follow-up touches [#add-follow-up-touches]
Do this when you want each home to get more than one card. Each touch has its own template, postage and wait.
In Send Mail, go to the **Creative** step.
Under **Pick your first touch**, click a template, then click **Use this design**.
Under touch 1, click **Add second touch**. The design picker opens.
Click a template for touch 2, then click **Use this design**.
On the line above touch 2, set when it sends: a number, then days, weeks or months after touch 1.
Optional: Click the postage tag of a touch, and select **First Class** or **Standard**.
Optional: In **Mailing and timing**, select a **Production speed**: **Standard**, **Faster** or **Fastest**.
A new touch sends 2 weeks after the touch before it, by default. To change a design, click **Change design** on the touch. To remove a touch, click its **Remove touch** button. A campaign holds 10 touches at most.
A forecast weather rule also shows **When it mails**. **As it triggers** mails each home when the rule fires. **As the event happens** times the card to land when the weather comes.
You're done when each touch shows a template. Nothing is charged until a run mails.
## Set a budget and turn the automation on [#set-a-budget-and-turn-the-automation-on]
Do this at the end of Send Mail, to set what the automation can spend and to start it.
An automation charges for each run that mails, up to its budget. LettrLabs uses your balance first, then your payment method. The card processing fee is charged on top of the budget.
Go to the **Budget** step.
In **Budget**, select **Monthly Budget**, and enter an amount from $100 to $10,000,000. Or select **No limit**.
In **When the budget runs out**, select **Don't send**.
Read the **Review**, then click **Turn it on**.
In the **Name your campaign** dialog, keep or change the **Name**. Then click **Turn it on**.
The **Budget** step changes with the source:
| Source | What the Budget step asks |
| ----------------------------------------------------- | --------------------------------------------------------------------------------------------------------- |
| Area mail | A monthly budget. **No limit** is not offered. |
| Weather and power outages | A monthly budget or no limit, **Approval**, and an **Event Limit**. |
| CRM, store, new movers, website visitors and webhooks | A **Monthly limit**: the most first touches the automation mails each month. Leave it empty for no limit. |
When you select **No limit**, a dialog says "This automation has no spending limit." Click **Set a limit** to go back. Click **Activate with no limit** to turn it on.
A CRM, store, new mover, website visitor or webhook campaign opens the **Enable Automation** dialog. Click **Enable Automation**. A new mover campaign also runs a checkout in this dialog. Select a payment method there.
You're done when the message "Your automation is on" shows. A CRM, store, new mover, website visitor or webhook campaign shows the message "is created" and opens its page. The campaign shows on the **Automations** tab of **Campaigns** with the status **Active**. You can pause it at any time.
When you pause a campaign with scheduled follow-up touches, the pause dialog shows **Also cancel the scheduled follow-up touches**. The box is clear by default. Select it to cancel those touches and return their reserved budget.
## Edit an automated campaign [#edit-an-automated-campaign]
Do this to change the rule, the area, the touches, the budget or the approval of an automation.
Open the campaign page. Click **Actions**, then click **Edit**.
Open the section that you want to change, such as **Mailing** or **Budget**.
Make the change.
Click **Save changes**.
The edit page has these sections: **Name and purpose**, **Trigger and audience**, **Where and which homes**, **Keep out**, **Mailing**, **Mailing and timing**, **Budget** and **Experiments**. An older CRM automation shows its own sections, such as **CRM source and filters** and **Monthly limit**. To leave with no change, click **Discard changes**.
To add or change the holdout, open the campaign page and click **Actions**. Click **Add a holdout** or **Change the holdout**. A holdout keeps a share of each next batch unmailed, so the results show the lift of the mail.
You're done when the message "Campaign saved" shows. The changes apply to the next run. Runs and orders that exist keep the old design.
## Retry or cancel a held or scheduled touch [#retry-or-cancel-a-held-or-scheduled-touch]
Do this when a touch waits for you, or when you want to stop a touch that is scheduled.
A cancel cannot be undone. When you cancel a touch, LettrLabs also cancels each later touch of that run. A cancel refunds each paid version of the touch.
Open the campaign page. A warning shows for each held touch, such as "Touch 2 of run 118 is on hold: Payment failed".
To mail the touch, click **Retry**. In **Pay with**, select a payment method, then click **Retry now**.
To stop the touch, click **Cancel**. Optional: In **Why do you cancel it?**, enter a reason. Then click **Cancel the touch**.
Some holds need a fix before a retry. For "Not enough discount codes", click **Add coupons**. For "Merge field missing", click **Edit the campaign** and add a fallback. A hold of "No home to mail" has no **Retry**, so cancel it.
To cancel a touch that is scheduled, open the **Batches** tab. In the run, click **Cancel** on the touch. In the dialog, click the cancel button, such as **Cancel touch 2**. A touch that is in production already cannot be canceled.
A run that waits for approval shows an alert icon on its row in **Campaigns**. Click the icon to open the run on the Approvals page.
You're done when the message "Retry started" or "Touch canceled" shows. To keep the touch as it is, click **Keep it on hold** or **Keep the touch**.
## Change several automations at once, or process one now [#change-several-automations-at-once-or-process-one-now]
Do this to turn on, pause, move or delete many automations in one step.
In **Campaigns**, click the **Automations** tab.
Select two or more automations.
In the bar at the bottom, click **Activate**, **Deactivate**, **Move to section** or **Delete**.
Bulk edit is not available yet. The edit action of the bar is off and reads "Bulk edit is not available yet." To edit an automation, open its campaign page.
To start a run now, open the row menu of the automation and click **Process now**. You can also click the **Process now** button beside the queued count on the campaign page. **Process now** works only on an active automation that mails a CRM or a list.
You're done when the message "The run is queued" shows. The next cycle picks its homes within the hour. With **Approve each run**, the message "The run waits for your approval" shows.
## Use the tools of an older automation [#use-the-tools-of-an-older-automation]
Some automations were made before Send Mail, or launch as an older automation. They keep their own tools on the campaign page.
Open the campaign page of the older automation.
Click a tool in the action bar: **Analytics**, **Duplicate**, **Manage cadences** or **Process now**.
To change the status, open the status menu and click **Active**, **Test mode** or **Paused**.
In the confirm dialog, click the button to confirm, such as **Pause Automation**.
**Test mode** collects the people that the automation finds. It mails nothing until you activate it. **Analytics** shows the recipients, the cadence and the export. **Manage cadences** shows the follow-up touches that are in progress.
The tools that show depend on the kind of automation. **Relaunch to a new audience** and **Add a holdout** are not offered on an older automation.
You're done when the status shows the new value.
## FAQ [#faq]
Check the status on the campaign page. **Paused** and **Inactive** mail nothing. **Budget reached** waits for the next month. **Payment failed** waits for a new payment method. Then check the Approvals page for runs that wait for you, and the campaign page for held touches.
A Send Mail automation is **Active** or **Paused**. Use **Turn it on** and **Pause** on the campaign page. **Test mode** shows only on an older Open API, webhook, Klaviyo or Shopify automation. In test mode, the automation collects the people it finds, mails none, and charges nothing. To start to mail, set the status to **Active**. See [Campaign statuses](/sending-mail/campaigns#campaign-statuses) for each status that a campaign can show.
You selected **No limit** in **Budget**. The automation then mails every home that qualifies, each month, with no cap. Click **Set a limit** to set a monthly budget.
The budget is empty, or it is out of range. Enter an amount from $100 to $10,000,000, or select **No limit**.
Your plan does not include automations. LettrLabs saves the campaign, but it does not mail. Upgrade your plan from the prompt. Then open the campaign and turn it on.
**Process now** works only on a CRM or a list. An event or signal campaign mails when its event happens. An area campaign mails at the pace of its budget. A campaign that is off must be turned on first.
The payment of a touch failed. LettrLabs tries the card again each day. To mail the touch now, click **Retry**, and pick another payment method.
The run is much larger than the usual runs of the campaign. Open the Approvals page, check the run, and approve or skip it.
The campaign keeps its CRM segment, but it does not mail yet. Nothing is charged. The first send starts without a change from you.
## Related [#related]